Your desktop computer keeps displaying “Can’t Connect To This Network” issues after you set up the Wi-Fi. Don’t worry about it. Due to our own personal experience with this issue and the frustration it causes, we decided to create a “how to solve” lesson to help others avoid the same annoyance.
One of my biggest gripes about such a pop-up is that it doesn’t explain why the Wi-Fi connections aren’t forming. What it’s like ringing her office doorbell and not expressing your displeasure when she finally responds is equal.
One can still find the underlying cause for the “Can’t Connect To This Network” problem in Windows computer settings after making some strange comparisons.
Windows 10 Can’t Connect To This Network is one problem you could encounter while trying to connect your Windows PC to a network. Aside from alerting you that the network is unavailable, the notification does not provide enough information about how the problem occurred or what you can do to fix it.
Read Also:
In a situation like this, it’s normal to feel a bit lost and unsure of what to do. Some workarounds exist, though, so you can still use your preferred network on the Device..
What is the “Can’t Connect to This Network” Error?
The “Can’t Connect to This Network” error is a common issue that Windows users encounter when attempting to connect to a Wi-Fi network or an Ethernet connection.
It manifests as a notification in the Windows Network and Sharing Center or as a pop-up message, and it typically indicates that your device is having difficulty establishing a connection with the selected network.
Understanding the Causes
To effectively troubleshoot and resolve the “Can’t Connect to This Network” error, it’s essential to understand the common underlying causes:
- Incorrect Network Credentials: Entering the wrong Wi-Fi password or network security key can prevent your device from connecting to the network.
- Outdated Network Drivers: Outdated or incompatible network drivers can lead to connectivity issues, resulting in this error.
- Signal Interference: Physical obstructions, electronic devices, or interference from neighboring networks can weaken or disrupt Wi-Fi signals, causing connectivity problems.
- Network Configuration Issues: Problems with your network settings or router configurations, such as IP address conflicts or incorrect DNS settings, can trigger this error.
- Security Software Interference: Overly aggressive firewall or antivirus settings can block network connections, preventing you from connecting to a network.
- Router or Modem Problems: Hardware issues with your router or modem, such as overheating, can result in connectivity problems.
- Network Profile Corruption: Corrupted network profiles can lead to connectivity issues, making it challenging to connect to specific networks.
How to Fix Can’t Connect To This Network
Whenever your computer is unable to connect to a network and access the internet, you’re likely to run into this problem. You can’t send or receive data if you don’t have a connection, therefore your device will be dormant without one.
There are a wide range of factors that could be responsible for this type of behaviour, from driver software to network setup issues. An additional list of the most common causes of the “Can’t Connect To This Network” error in Windows 10 is provided below:
- Deprecated or obsolete drivers.
- Mistakenly configured settings.
- Clogged cable Account configuration is required to fix the software issue.
- An issue with the machinery.
- There’s a snag on the ISP’s end.
Method 1 is a good place to start if you don’t know how to adjust things and want to make your way down the list until you find a solution based on what happened.
1. Wi-Fi Network Adapter Driver Tweaking
Here, we’ll explain how to upgrade the wireless setup driver instead of using the first method. Out-of-date network adapter components are the most common culprits in this situation, because that is the first thing you try:
Step 1: Push Wins+X to bring up the control panel from the start screen.
Step 2: Select Device Manager from the drop-down menu.
Step 3: Choose a network adapter from a drop-down menu or manually.
Step 4: After you’ve clicked right on the device, open the context menu and select “Upgrade drivers software”. Make sure that the option to “Auto scan for upgraded driver software” is selected from the pop up menu.
It was at this point that the new driver would begin to download and install. Just keep tapping “Close” until you’re done.
Step 5: Restart your computer. To reload the drivers, you can connect your laptop to the routers via Lan and then download the driver from the company’s website if it fails to locate or upgrade them.
In the event that this fails, return to step 4 and select “Surf my computer searching driver software,” then select “Allow you to decide from the devices listing.”
Step 6: After unchecking the “Display relevant hardware” item, select the appropriate driver from the list. Inspect to see whether the issue persists.
You can try reverting your drivers by following the instructions up to phase 3 and then selecting “Properties” when you select a component.The “Rollback Driver” button may be found when you click on the “Driver” section in Step.
Step 7: Follow the on-screen directions to uninstall the drivers and check whether the issue persists.
2. Power Cycling
We’ll show you how to try to fix the problem by shutting down the network for a few minutes and then re-connecting afterward:
Step 1: Press and hold the power button on the router’s back to turn it off.
Step 2: After turning it on, wait 30 minutes before using it again.
Step 3: Once the connection appears in your Wi-Fi connectivity search bar, reconnect and see whether the issue persists.
Is there still a problem with you after all of this? After that, see how to do the following.
3. Run the Windows Troubleshooter
Using the networking troubleshooter, you can locate and fix the system’s ongoing ailment if you’re still having issues solving the problem.
Step 1: Settings can be found on the Desktop by clicking on the Settings icon.
Step 2: From the Update & Security drop-down menu, select the one you want.
Step 3: Select Troubleshoot from the side panel on the left.
Step 4: Find the Network Adapter in the list, right-click it, and select Launch your troubleshooter from the context menu.
After locating the issue, this troubleshooter will help you fix it.
4. Switch Your Wireless Adapter’s Network Key from WPA-PSK/WPA2-PSK to WPA2-PSK using TKIP/AES
Many operating systems prior to Windows 8 had WEP, or Wi-Fi Encryption Protocol. As of Windows 8 and later, WEP and WPA-PSK are no longer supported by Microsoft. If the cellular modem is using WEP, you probably won’t be able to access the system (aka WPA-PSK).
To be on the safe side, follow these steps: This is only possible if you’re connected to the internet that’s causing you problems.) Use an Ethernet cable if possible, or use a system that isn’t affected by this issue to connect to ours.
This guide is always written for Windows 10. Look for comparable models with Windows 8 or later iterations.)
Step 1: Press Wins + A to open the task switcher.
Step 2: The second step is to select Configuration from the drop-down list.
Step 3: From the drop-down option, select Networking and Net. Using the drop-down menu, choose advanced settings from the options available. Using the characteristics tab, you’ll be able to discover which form of protection your networks use under the protection type section.
The network operator should be able to provide you access to their network if the existing one is converted to a Wifi adapter and TKIP is used for protection.
This method can be attempted manually by more experienced users by connecting the desktop to a Lan network and then adjusting the WEP / WPA-PSK security settings to WPA2-PSK employing TKIP/AES decryption from the router’s cordless security settings.
Get the Home Gateway ISP and then type in the address in the address field to get to the internet router. Starting -> Commands -> Ipconfig/all will provide you your IP address.
5. Ignoring the Internet
It’s common knowledge that relaunching a problematic machine will fix the issue. If you have a wired connection, you may do the same. In order to see whether there are any issues with the connection, you might try disconnecting and reconnecting to it.
No matter how important it could be, we decided not to risk it because of the possible consequences.
Step 1: In the taskbar, look for a networking icon and right-click on it. From the menu that opens, select Access Networking & Net Configuration.
Step 2: Click on the Wi-Fi tab in the left-hand panelbar to see your wireless adapters. To get to the next page, click Manage recognised networking in the rightmost panel. A list of all the channels your system has ever been linked to will appear in step four. If you’re having trouble connecting to a specific one, click the Forgot icon next to it.
The channel would be removed from the list at this point.
Step 3: To re-join, simply search for it as you normally would and select that option from the results.
6. Reset the Network
When your helpful framework is inaccurate, you may hear complaints like “Wins 10 can’t access this networking.” Before getting into specifics, the simplest way to fix the problem is to reconfigure the entire network.
Afterward, if necessary, you can modify the settings back to the manufacturer’s specifications.
Step 1: Use Cortana to open the Workstation’s Settings page.
Step 2. From the drop-down option, choose Networking & Web.
Step 3: Select a state from the side panel on the left of the display. Take a look at your right-hand column, and then tap on the Networking Refresh option. This display should be nearing its conclusion when you see it.
Select the Reset Immediately option to restore all settings.
7. Alter the Mode of Transmission
A communication protocol you specified in your transmission settings may be incompatible with your routers on rare occasions. So we’ll alter the connection mechanism at this step and see whether it fixes the issue. Consequently:
Step 1: Press “Wins” + “R” to bring up the Ran alert.
Step 2: Type “Devmgmt.msc” into the command line and press “Enter” to begin.
Step 3: Selecting “Networking Adapter” from the “Networking Adapters” list and clicking the right mouse button. Next, select “Advanced” from the “Preferences” menu by tapping on the “Advanced” section.In the “Options” menu, select “Disabled,” and then select the “802.11n” protocol from the drop-down list.
8. Unplug and Re-plug Your Wi-Fi Adapter
In other circumstances, simply disconnecting and reactivating the networking adapter will fix the issue. A fix for the networking adaptor issue has been found, according to reports. This can be done by filling out the form below.
Step 1: Press “Wins” + “R” to bring up the Ran alert.
Step 2: Type “Devmgmt.msc” into the command line and press “Enter” to begin. Next, select the “Networking Adapter” from the list of “Networking Adapters” by clicking right on it.
Step 3: Right-click the adapter and select “Stop Devices” to disconnect it. Wait 10 seconds before hitting “Activate Devices” on the right-click menu.
As a final precautionary measure, try disabling all of the network adapters inside the Workstation, save for the one used by the computer.
Inspect to see whether the issue persists.
9. Change the Network Name
To their amazement, a few customers were able to fix the problem by changing their router’s networking name. Once on the router’s main page, click on Network Configuration, and you’ll be sent to the settings page.
In this part, you’ll find a field for entering a new name for your social networking profile. Because routers and ISPs differ, it is best to consult the manual that came with yours for specific instructions.
10. Network Reset
Additionally, a Network Reset can be done to remedy this issue. Create an access panel and then enter the restore phrase to achieve this. Consequently:
Step 1: Press “Windows” + “R” to activate the Ran alert.
Step 2: Type “cmd” and press “Shft” + “Control” + “Enter” to grant administrator privileges. Put in the instructions and then press “Enter” to run them. Following the completion of the steps in Step , you will need to restart your device.
Check to see whether the problem persists.
Read Also:
Conclusion
After all, this is what was suggested to fix the “Can’t Connect To This Network” issue. Fortunately, one of the possibilities was available to you. There is a good chance that your web host is to blame if the problem persists.
There’s a chance that you and your friend can meet up. As a result, people will not be able to access your websites, documents, or anything else that requires a web connection if you have the “Windows Can’t Connect To This Network” problem.
When working on a computer, bugs are by far the most inconvenient things to deal with. Consequently, you need to know how to handle and fix your mistakes. If you have found a solution using any of the methods suggested above, please share your opinions in the comment section below.
